Abstract
Drilling and fracturing are the key technologies for shale gas extraction, while most of the loads generated during rock drilling or fracturing are dynamic. In this study, dynamic impact experiments were conducted on the cracked chevron-notched Brazilian disc shale specimens with different chevron-notched crack (CNC) inclinations (β) and layer inclinations (α) by the split Hopkinson pressure bar. The results show that the dynamic peak load and dissipated energy increases with the increase of β, α, and strain rate, but their changing trends are different. The generation and expansion of cracks during the specimen failure process are mainly affected by β. As β increases, the failure type of the specimen can be divided into pure mode I fracture, mode I-II mixed fracture, pure mode II fracture, mixed tension-shear failure, and Brazilian splitting failure. The increase in strain rate will lead to a decrease in the time for crack initiation and propagation as well as an increase in secondary cracks. In addition, the mode I fracture toughness (KⅠC) and mode II fracture toughness (KⅡC) both grow with the increase of α and strain rate. The KⅡC predicted by the generalized maximum tangential stress criterion (GMST) exhibits more accurate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
