Abstract
The influence of magnesium to phosphate weight ratios (M/P ratio), borax content, water to cement ratio (w/c ratio), fly ash, slag on magnesium phosphate cement of drying shrinkage is examined.The results show that the drying shrinkage of magnesium phosphate cementcan be affected at some extent by M/P ratio, w/c ratio,boraxcontent. Both the former two factors and the effects are significant.It was found that the drying shrinkage of magnesium phosphate cement decrease with the increase of M/P ratio,borax content, w/c ratio. If the 10%, 15% offly ashinstead of magnesium phosphate cement was added, drying shrinkage rate decreases with increases of dosage fly ash. When the 15% of magnesium phosphate cement is replaced by fly ash, the shrinkage rate of hydration 20d reachs11.2×10-5. When the 10% of magnesium phosphate cementis replaced by slag, the drying shrinkage rate reducedto 87.6%.comparing to the bench mark ,the drying shrinkage rate of 20d is only 2.78×10-5.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.