Abstract
ABSTRACT The ternary hybrid material chitosan/4A Zeolite/Zr based Zeolite was synthesized by using 4A zeolite molecular sieve, Zr-zeolite and chitosan acetic acid solution as starting materials. The prepared composite were characterized by SEM, FT-IR and XRD. The experimental conditions such as the concentration of chitosan acetic acid solution, mass ratio of mass ratio of chitosan acetic acid solution, 4A zeolite molecular sieve and Zr-zeolite functional material, the optimum calcination temperature were optimized. Under this optimum conditions, the denitrification and dephosphorization effect can reach more than 70% when pH value was at 3–9. Dynamics research results showed that the ammonia nitrogen and phosphorus removal progress by chitosan/4A Zeolite/Zr based Zeolite was in accordance could be well described by the pseudo-second-order kinetic model, and the adsorption rate is up to 6.439 g/min. The isothermal adsorption process was in accordance with Freundlich model.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.