Abstract
AbstractThe mechanical and damping properties of blends of ethylene‐vinyl acetate rubber(VA content >40 wt %) (EVM)/nitrile butadiene rubber (NBR) and EVM/ethylene‐propylene‐diene copolymer (EPDM), both with 1.4 phr BIPB (bis (tert‐butyl peroxy isopropyl) benzene) as curing agent, were investigated by DMA. The effect of polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), and dicumyl peroxide (DCP) on the damping and mechanical properties of both rubber blends were studied. The results showed that in EVM/EPDM/PVC blends, EPDM was immiscible with EVM and could not expand the damping range of EVM at low temperature. PVC was miscible with EVM and dramatically improved the damping property of EVM at high temperature while keeping good mechanical performance. In EVM/NBR/PVC blends, PVC was partially miscible with EVM/NBR blends and remarkably widened the effective damping temperature range from 41.1°C for EVM/NBR to 62.4°C, while CPVC mixed EVM/NBR blends had an expanded effective damping temperature range of 63.5°C with only one damping peak. Curing agents BIPB and DCP had a similar influence on EVM/EPDM blends. DCP, however, dramatically raised the height of tan δ peak of EVM/NBR = 80/20 and expanded its effective damping temperature range to 64.9°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
