Abstract
Cerium-zirconium composite oxides (Ce0.7Zr0.3O2) have a remarkable effect on catalytic removal of carbon particles (PM) and nitrogen oxides (NOX) emitted from diesel engine, in order to further improve the thermal stability, oxygen storage capacity and low temperature catalytic REDOX performance of cerium zirconium composite oxides (Ce0.7Zr0.3O2), a small amount of Pr and Nd rare earth elements are doped to improve the catalytic activity of cerium zirconium composite oxides. In this paper, the composite oxide of Pr6O11–Nd2O3–CeO2–ZrO2 is prepared by unsteady co-precipitation method, and the physicochemical properties of the composite oxide catalyst are analyzed by BET, SEM, XRD and ICP. The gas adsorption capacity and catalytic activity of composite oxide catalysts are measured by temperature programmed reaction technology (TPR). The results show that the composite oxide of Pr0.05Nd0.05Ce0.6Zr0.3O2 prepared by using rare earth elements Pr and Nd inhibits the growth process of grain, refining the grain, and improving the sintering phenomenon at high temperature. The addition of Pr and Nd causes lattice defects, increases the number of oxygen vacancies, and improves the mobility of lattice oxygen, namely promotes oxide oxygen storage property, gas adsorption and catalytic oxidation reduction ability. After modification, Pr0.05Nd0.05Ce0.6Zr0.3O2 has good resistance to high temperature aging performance, prolongs the service life, reduces the PM lowest ignition temperature and minimum catalytic activity temperature of nitrogen oxide, and promotes the NOX reduction rate. For Pr0.05Nd0.05Ce0.6Zr0.3O2, the lowest ignition temperature of PM is about 150 °C, and the lowest catalytic activity temperature of NO is about 130 °C. The maximum CO2 production rate is 68.3%, and the maximum NO reduction rate is 45%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.