Abstract
Traditionally, the curved surfaces are generated by a complicated machining process to achieve the required surface quality. To simplify this process, the abrasive will be mixed with the binder to become a polishing slurry. This slurry does not obey the Newton laws when it moves. This process will produce the shear stress for the slurry on the machining surface. Based on the non-Newton fluid, the curved surface will be machined by a simple machining process. In this paper, the effects of grinding speed, slurry concentration and abrasive size on the surface roughness are discussed. The experimental results show that the polishing speed has an obvious influence on surface finishing. With the increase of the polishing speed, the surface roughness reduces. In addition, the slurry concentration also affects the surface quality like the polishing speed. The abrasive size has a small effect on the surface finishing. The surface roughness of steel spherical workpiece Ø40 mm is reduced sharply from Ra = 130 nm to Ra = 23 nm after treatment.
Highlights
Điều này có nghĩa là, khi nồng độ dung dịch thấp thì tỷ lệ hạt mài trong dung dịch sẽ ít, do đó khả năng tạo ra ứng suất cắt, sự kết dính và đông đặc của dung dịch giảm xuống
The slurry concentration affects the surface quality like the polishing speed
Summary
Sự phát triển mạnh mẽ của ngành công nghiệp chất bán dẫn, thiết bị quan sát, dụng cụ quang học và quang điện tử đã làm tăng nhu cầu đối với các bề mặt cong. Ứng suất chất lỏng phi Newton được sử dụng để tạo nên quá trình cắt gọt trong gia công [9]. Chất lỏng phi Newton này có khả năng gia công linh hoạt với các bề mặt cong mà vẫn đáp ứng được yêu cầu cắt gọt và chất lượng bề mặt, trong khi đó dung dịch mài có thể sử dụng lại sẽ không gây ảnh hưởng đến môi trường. Mô hình thí nghiệm gia công mài tinh bề mặt cầu được thiết lập để nghiên cứu ảnh hưởng của các thông số gia công đến chất lượng bề mặt để đánh giá khả năng gia công của phương pháp
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have