Study on the Anti- Corrosion Properties of Organic and Inorganic Inhibitor by Electrochemical Treatment in Aqueous Solution

Abstract

The various methods for improving chloride penetration resistance in the reinforced concrete have been developed. Among the related general ways, using of corrosion inhibitor became very common. Therefore, in this study, in order to comprehend performance of corrosion inhibitor, the experiment study was conducted about corrosion characteristic of 3 steps(0.0, norm 1/2, norm) compared to organic corrosion inhibitor standard use of liquid and molar 3 steps(0.0, 0.3, 0.6%) of Chloride by added amount of inorganic corrosion inhibitor by the corrosion inhibitor types about 2.4kg/m3, 4.8kg/m3based on Chloride ion content 1.2kg/m3for service life prediction of concrete structure by using Poteniostat. As results, in the case of inorganic nitrous acid corrosion inhibitor, it was confirmed that anti-corrosive performance of Chloride ion content 1.2kg/m3by corrosion Ecorr -0.30V in more than molar ratio 0.3%, and it also was confirmed that anti-corrosive performance of 2.4kg/m3, 4.8kg/m3in more than molar ratio 0.6%. In addition, the excellent anti-corrosive performance of organic corrosion inhibitor was shown in 1/2(0.42kg/m3) of norm regardless of Chloride ion content, and it can be seen that absorption types organic corrosion inhibitor has excellent anti-corrosive performance compared to the inorganic nitrous acid corrosion inhibitor by the added amount of corrosion inhibitor.