Abstract
Abstract The continuous cost reduction of wind turbines has consolidated the competitiveness of wind energy. With the increasing installation of wind turbines in seismic-prone regions, it is likely that earthquakes will strike farms in operation. A practical approach to predict the dynamic behavior of a wind turbine under simultaneous seismic and operational wind loads is investigated in this work. The combined action can be determined by analyzing the wind and the seismic-induced responses separately. However, an accurate definition of the aerodynamic damping is required for this purpose and there are few experimental studies on the additional damping source. A 1/100-scaled wind turbine model was designed and the aerodynamic damping of the model was identified. Subsequently, the ground motion was applied in the model by means of a shake table and the combined wind/earthquake response that was measured experimentally was compared with the response predicted by several combination rules. A numerical study using the FAST analysis package for wind turbines was also conducted to complement the experiments with fully-coupled simulations that include aeroelastic effects. This work provides a necessary experimental reference for structural engineers to use adequate aerodynamic damping and load combination methods for the seismic analysis of wind turbines in operation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.