Study on tensile behavior at various temperatures of the Mg-7Gd-5Y-1Nd-2Zn-0.5Zr alloy

Abstract

Mg-rare earth (RE)-Zn alloys with long-period stacking ordered (LPSO) structure show excellent room temperature, elevated temperature mechanical properties. In this work, microstructure and mechanical properties of Mg-7Gd-5Y-1Nd-2Zn-0.5Zr (wt%) alloy after tensile deformation at various temperatures (room temperature (RT), 250 °C and 300 °C) were investigated. The pre-precipitated alloy exhibited tensile yield strength (TYS) of 149 MPa at room temperature, while it maintained relatively high TYS at 250 °C (154 MPa) and 300 ℃ (123 MPa). The microstructural characterizations revealed that such outstanding heat resistance is mainly attributed to the blocky LPSO structure near the grain boundary; basal plate-like precipitates, twins and kink bands inside the grain. The blocky LPSO structure exhibits a coherent boundary with one α-Mg grain, while being incoherent with other α-Mg grains or the LPSO structure. Cracks primarily occured along the incoherent interface. Basal plate-like precipitates formed during elevated temperature tensile deformation included GP zones, γ', metastable LPSO building blocks, and fine 14H-LPSO structure. A probable γ-precipitation sequence is supersaturated solid solution → GP zones (ABAB-type) → single LPSO building block (γ')→ various metastable LPSO building block clusters→ 14H-LPSO (γ). The deformation modes (sliding, twinning, kinking, grain boundary sliding, etc) modified with the tensile temperature increase. <c+a> dislocations were observed at elevated temperatures. As the temperature of tensile test increases, twins become less. Grain boundary sliding occurs at elevated temperatures.