Abstract
ABSTRACT A dual-phase change material (DPCM) containing polyethylene glycol (PEG) 400/expanded graphite (EG) and PEG1500/EG with both high and low-temperature regulation capacities was prepared. It was added as an additive to the NovaChip-Type C asphalt mixtures. Laboratory and field temperature regulation tests were designed. The images taken by SEM showed that PEG was fully adsorbed by EG and the structure of DPCM was stable. The test results showed the DPCM has good durability in the cyclic phase change process. The modified asphalt binders with different DPCM content showed different heat storage capacity. The results of temperature regulation tests showed that the addition of DPCM effectively reduced the temperature change rate of asphalt mixtures. With 1.88% DPCM, the extremum of high temperature of asphalt mixtures reduced by 2.3°C while the extremum of low temperature increased by 2.0°C. In terms of road performance, the cracking resistance at low temperature of asphalt mixtures gradually improved with the increase of DPCM content. Meanwhile, the rutting resistance at high temperature and water damage resistance still met the requirements of the specification. The DPCM had a good effect on restraining the occurrence of road diseases caused by temperature and prolonging the service life of the road.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
