Study on surrounding rock failure mechanism and rational coal pillar width of the gob‐side coal roadway under influence of intense dynamic pressure

Abstract

AbstractA reasonable width of the coal pillar is very important to the surrounding rock control of the gob‐side roadway. An unreasonable width of the coal pillar will make the roadway to be located within the range of strong mining influence, leading to severe deformation of the roadway. Severe subsidence at the coal pillar side of the roof and serious coal pillar deformation are problems caused by strong dynamic pressure due to mining in the gob‐side coal roadway. This paper studies the surrounding rock instability mechanism and rational coal pillar width of the gob‐side coal roadway under the influence of intense dynamic pressure. The results show that: (1) Under the condition of large mining height, the roadway overburden is a hinged structure, and an unreasonable coal pillar width makes the gob‐side coal roadway to be located below the main roof fracture line. The rotary movement of the key block of the main roof is the main reason for the roadway deformation. (2) According to the evolution law of stress field, displacement field and plastic zone of surrounding rock of roadway under different coal pillar widths during roadway driving and mining were studied, and it is concluded that a 6‐m‐width coal pillar is the most reasonable. (3) Based on the stress distribution and plasticizing range of surrounding rock in a narrow pillar roadway, the combined support scheme of “anchor cable + grouting + single prop” is proposed and applied to engineering practice. The practice results show that the roadway deformation is well controlled, and the safe mining of the working face is realized.