Abstract
In this study, the surface modification of attapulgite was studied. Firstly, the experiment of acid roasting was carried out. The morphology and composition of attapulgite before and after modification were systematically studied by means of SEM, TEM and FTIR. The results showed that the optimal experimental conditions for modification were hydrochloric acid acidification, the concentration was 1 M, the acidification time was 4 h, and the temperature was 75 °C.The thermal activation conditions were determined to be 420 °C roast for 2 h. Attapulgite was successfully modified, and its specific surface area ratio increased greatly, from 144.29 m2g−1 to 187.87 m2g−1. In this study, the attapulgite with high specific surface area prepared is of great significance for the further use of attapulgite with high added value.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
