Study on Spinning triangles in the common ring spinning and Super draft ring spinning systems

Abstract

In the paper, one kind of super draft ring spinning frame with four drafting rollers and corresponding three drafting zones were introduced. The yarn qualities spun by the super draft ring spinning frame were analyzed by studying the shape of spinning triangles. Using the high speed camera system OLYMPUS i-speed3 and one kind of transparent front top roller, the spinning triangles were captured, and the geometry size of spinning triangle were measured. Then, according to the theoretical model of fiber tension in the spinning triangle, fiber tension distributions in the spinning triangles were presented by using Matlab software. Using the combed roving of 350 tex as raw material, three kinds of cotton yarns, 27.8 tex (21S), 18.2 tex (32S) and 14.6 tex (40S), were spun in the common ring spinning frame with three different suitable spindle speeds, travelers and twist factors. Using the combed roving of 350 tex and 500 tex as raw material, 14.6 tex cotton yarns were spun in the super draft ring spinning frame with three different drafting ratios at back zone. It is shown that with the increasing of spindle speed, a more asymmetric shape of spinning triangle would be produced, and lead to worsen yarn evenness. With the decreasing of traveler weight, the height and horizontal deviation of the spinning triangle is decreased, and may lead to better yarn evenness and less long hairiness. By taking suitable large yarn twist factors, the comprehensive qualities can be improved. Comparing with the common ring spinning, the spinning triangle is larger in the super draft ring spinning. That is, in the super draft ring spinning, the fibers in the strand in the front roller nip are more dispersed, and not benefit for yarn qualities. Therefore, the compact device was introduced into the super draft ring spinning, and the cotton pure yarns and blend yarns were spun, and the yarn qualities were measured and analyzed.