Abstract
The solidification and phase transformation behaviors of IN625 with low C and Fe were investigated through directional solidification and quenching experiments. The primary and secondary dendrite arm spacing decreased exponentially as the solidification rate increased, demonstrating good agreement with theoretical equations. The MC carbide formed at a constant temperature gradient regardless of the solidification rate. It is reasonable to assume that the Laves phase solidified in the final stage of solidification, as it was found at the bottom of the mushy zone. The morphologies and sizes of the MC carbide and the Laves phase were closely related to the solidification rate. Increasing the solidification rate at a constant thermal gradient resulted in the development of the MC carbide from blocky to Chinese script, and eventually spotty shapes, along with decreasing size. As a result of this research, it is believed that the weldability of the alloy could be improved at the expense of mechanical properties, especially with low C and Fe contents and a relatively high solidification rate, which are able to generate the finely distributed MC and Laves phase.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.