Abstract
With the social development, the increasing sludge and its subsequent treatment are very severe environmental problems.The adsorption experiments were carried out using different pretreated exess sludge as adsorbent for Cu2+. The sludge of NaOH-H2O2 treated improve the adsorption capacity which reached 56.12mg/g, however the adsorption capacity of the sludge using ZnCl2-Carbonization treated decrease.Both Langmuir and Freundlich isotherm models fit the adsorption data well with the three types of sludge . The value of R2 exceeds 0.96 in most cases. Relative to the Pseudo first order kinetic model,the pseudo second orderkinetic model fit the adsorption data more well with the adsorbents. The value of R2 reached about 1. The maximum adsorption efficiency for optimum pH is about 6. With the increase of adsorption mass, the removal efficiency of sludge increases.For 150mL copper ion solution which concentration was 100 mg/L,the optimum sludge mass corresponds to maximum adsorption efficiency was found to be 1.5g.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
