Abstract
In this paper, the conventional physical separation method such as flotation, gravity separation, magnetic separation, alkaline leaching and sulfuric acid leaching were studied. The effects of grinding fineness, amount of agent, magnetic intensity, roasting temperature, roasting time, the leaching agent and leaching time on the leaching of zinc were investigated, respectively. The results show that the leaching rate of zinc is below 50% in the conventional alkaline leaching, and the leaching rate of zinc is below 85% and the leaching rate of iron is above 35% in sulfuric acid leaching. Compared with XRD pattern of the raw ore, the different diffraction peaks of smithsonite is off in alkaline leaching products. In sulfuric acid leaching, the different diffraction peaks of smithsonite are off in the leaching products when sulfuric acid concentration is less than 60 g/L. After 60 g/L, the different diffraction peaks of smithsonite and siderite are off in the leaching products.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
