Abstract
The development of ultrahigh molecular weight polyethylene (UPE) has been restricted due to its linear structure and low thermal conductivity. In this paper, graphene oxide (GO) was prepared by the modified Hummers method, and then UPE/reduced graphene oxide (rGO) powder was prepared by reduction with hydrazine hydrate. UPE/natural graphite (NG), UPE/carbon nanofiber (CNF), and UPE/rGO are prepared by hot compression molding. With the increase of thermally conductive fillers, the high density of the composite makes the thermal conductivity of the crystal structure more regular and the thermal conductivity path increases accordingly. Both TGA and SEM confirmed the uniform dispersion of carbon filler in epoxy resin. Among the three composites, UPE/NG has the best thermal conductivity. When the NG filling content is 60 phr, the thermal conductivity of the UPE/NG composite is 3.257 W/(mK), outperforming UPE/CNFs (0.778 W/(mK) and pure UPE (0.496 W/(mK) by 318.64 and 556.65%, respectively. UPE/CNFs have the best dielectric properties. Comparison of various carbon fillers can provide some references for UPE’s thermal management applications.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
