Abstract
To better understand the dust dispersion and pollution laws in coal-oil shale fully mechanized mining faces, the airflow distribution and coal and oil shale mixed dust emission law was simulated, and the simulation results are analyzed and verified in combination with the field measured data. The research results showed that in the area 0-10m on the leeward side of the front drum, most of the coal dust particles with a large particle size stay near the roof of the hydraulic support and the height of the breathing zone, while most of the oil shale dust particles with a large particle size stay in the area below the height of the breathing zone. In the height of the breathing belt, oil shale and coal dust particles seriously polluted the 0-6-m and 0-13-m areas on the leeward side of the front drum of the shearer, respectively. According to the different distribution of coal dust and oil shale dust, a wet dust collector and multi-nozzle atomization set are designed to remove dust. The field test results show that the dust removal rates of the two kinds of dust reach 83.4% and 87.5% respectively after the dust removal device is opened.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Environmental science and pollution research international
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
