Abstract
ABSTRACT The aim of the study was to address the challenge – in a particular plant – of the high (FeO) content in slag in Electric Arc furnace (EAF) steelmaking, adopting a high ratio of hot metal to scrap, which uses the operation mode of adding hot metal and smelting simultaneously, the oxygen blowing process was optimised through a combination of industrial practice and theoretical calculation. Specifically, the start time of oxygen blowing was delayed, and the [C] content of the molten steel at the smelting endpoint was increased; furthermore, an oxygen blowing method was performed with a [C] content of 0.6–0.8% for the molten bath during the smelting process. After the oxygen blowing method was optimised, the oxygen consumption per ton of steel decreased by 7.96 Nm3, and the (FeO) content of slag decreased by 11.85% on average.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
