Study on Optimum Selection Method of Additives for Slick-Water Fracturing Fluid

Abstract

In order to clarify the research idea of fluid system optimization in slick-water fracturing, a scientific and effective single-agent optimization method was selected to study the performance optimization method and performance evaluation method of drag reducer, clay stabilizer and cleanup additive in slick-water fracturing fluid. The specific experimental steps and application examples were investigated. To select the drag reducer, the drag reduction rate rate of the drag reducer at different concentrations should be measured first, the optimal concentration of a single agent should be selected, and then the stability test of temperature, flow rate and shear time should be performed on the optimal concentration of a single agent, and finally the combination formula with high drag reduction rate rate and stable performance can be selected. To optimize the clay stabilizer, the optimal concentration of single agent should be obtained by measuring the anti-swelling rate of different single agent and different concentration, and then the anti-swelling rate of each compound formula should be determined according to the optimal concentration of single agent, and finally the anti-swelling performance of the composite combination should be evaluated according to the core flow experiment. The optimal concentration of a single agent should first be optimized according to the surface tension of the cleanup additive, and then the combined formula should be optimized according to the surface tension of the combined combination, and the cleanup additive ability should be evaluated by core spontaneous imbibition or measuring the increase rate of cleanup additive.