Study on optimal energy efficiency of a sludge drying-incineration combined system

Abstract

Thermal drying is a frequently used technology to further remove the water in dewatered sludge. However, it is an expensive solution due to its highly energy consumption. The combination of sludge drying and incineration system, in which, the energy generated from sludge incineration is reused to sludge drying, can largely save the energy consumption of sludge treatment facilities. A bench-scale paddle sludge dryer was built to study the drying characteristics of sludge. Results show that, a significant fluctuation of sludge drying rate and stirring power emerges at the moisture content of 55–65 %. An energy model was established based on a sludge drying and incineration project. The most reasonable dryness of sludge outlet from sludge dryer and input to sludge incinerator was analyzed, in the purpose of achieving optimal energy efficiency. The mono-incineration of dry sludge can be achieved at 850 °C combustion temperature, when sludge lower heating value (LHV) is about 11213 kJ/kg and moisture content is about 60 % w/w. The effect of operation conditions, including sludge moisture content, LHV, and operation load were analyzed based on the energy model. This energy model could be applied for the improvement of energy efficiency of sludge drying and incineration combined system.