Study on novel steel slag foam concrete pore structure and bp neural network prediction model

Abstract

In this paper, a new type of steel slag foamed concrete was prepared. Its pore structure was analyzed by MATLAB image processing technique, and the influence of steel slag on the compressive strength of foamed concrete was investigated. In addition, a BP neural network prediction model for the pore structure of foam concrete was established. The research results show that when the content of steel slag is 30%, the pore structure of steel slag foamed concrete is appropriate. The compressive strength of steel slag foamed concrete increases with the decrease of the density and the proportion of irregular pores. With the density remaining unchanged, the compressive strength of foamed concrete increases with the increase of the ratio of round and small pores. The prediction errors of the BP neural network model in the average pore diameter and average pore roundness factor were less than 8.5% and 5%, respectively.This research can provide a theoretical basis for the production of steel slag foam concrete.