Abstract

With the government's emphasis on environmental issues of power transmission and transformation project, noise pollution has become a prominent problem now. The noise from the working transformer, reactor, and other electrical equipment in the substation will bring negative effect to the ambient environment. This paper focuses on using acoustic software for the simulation and calculation method to control substation noise. According to the characteristics of the substation noise and the techniques of noise reduction, a substation's acoustic field model was established with the SoundPLAN software to predict the scope of substation noise. On this basis, 4 reasonable noise control schemes were advanced to provide some helpful references for noise control during the new substation's design and construction process. And the feasibility and application effect of these control schemes can be verified by using the method of simulation modeling. The simulation results show that the substation always has the problem of excessive noise at boundary under the conventional measures. The excess noise can be efficiently reduced by taking the corresponding noise reduction methods.

Highlights

  • As an important power transfer station, the transformer substation is the main noise source in power transmission project

  • The sound field model of the substation can be established by using the SoundPLAN software

  • Reasonable treatment schemes focusing on excessive noise problem can be put forward, and the best noise control method can be obtained by using the simulation function of the SoundPLAN software

Read more

Summary

Introduction

As an important power transfer station, the transformer substation is the main noise source in power transmission project. It will inevitably affect the station staff, nearby residents, and the local environment. The research on substation noise control methods is important. The main noise of the substation comes from working transformer and reactor. The sound field model of the substation can be established by using the SoundPLAN software. Reasonable treatment schemes focusing on excessive noise problem can be put forward, and the best noise control method can be obtained by using the simulation function of the SoundPLAN software

Analysis on the Transformer Substation Noise
Result and Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call