Study on Multi-Tooth Meshing Problem for Involute Internal Gear Pairs with Small Tooth Number Difference of Stub Gear

Abstract

This article has carried out systematic research on the multi-tooth meshing problem of involute internal gear pairs with small tooth number difference of stub gear. It firstly establishes the entity assembly model of internal gear pairs with precise tooth profile, then determines the number of multi-tooth meshing teeth pairs with finite element software and finally analyzes the main factors and reason affecting the number of meshing teeth pairs. In the range of tooth number of internal gear equal to 40-150, the conclusion is that when tooth number difference equal to 1 the number of effective meshing teeth pairs is 2-10,when tooth number difference equal to 5 the number of effective meshing teeth pairs is 2-8. The main factors affecting the number of meshing teeth pairs are tooth number and tooth number difference. The fewer tooth number is and the greater tooth number difference is, the fewer the number of meshing teeth pairs is. The reason is that when tooth number is obviously reduced or tooth number difference is obviously increased, the clearance of adjacent gear surface will be greatly increased, which will cause the decrease of the number of meshing teeth pairs. Within the normal value scope of modification coefficient difference of involute internal gear pairs with small tooth number difference, the influence of modification coefficient difference and modification coefficient is very small. When the torque increases, the number of effective contacting teech pairs will keep unchanged. The research in this article provides reference for the calculation of loading capacity of multi-tooth meshing of internal gear pairs with small tooth number difference of stub gear