Abstract
To establish a highly sensitive fluorometric nanobiosensor for determination of aqueous mercury ions (Hg(2+)) using optimized mercury-specific oligonucleotide (MSO) probes and graphene oxide (GO). The nanobiosensor was assembled by attaching the self-designed MSO(1) (5' end labeled with fluorophore carboxyfluorescein (FAM), denoted as FAM-MSO(1)) and MSO(2) to the surface of GO through strong non-covalent bonding forces. Upon the addition of Hg(2+), the formation of the T-Hg(2+)-T configuration desorbed the FAM-MSO(1) and MSO(2) from the surface of GO, resulting in a restoration of the fluorescence of FAM-MSO(1). Using the specific mispairing of T-Hg(2+)-T and the changes in fluorescent signals in solutions, quantitative analysis of Hg(2+) could be performed. The average thickness of the prepared GO sheets was only 1.4 nm. For the Hg(2+) nanobiosensor, the optimum concentrations of FAM-MSO(1) and MSO(2) were both 1 µmol/L, the optimum volume of 0.5 g/L GO was 5 µL, and the limit of detection was 10 pmol/L; it had low cross-reactivity with 10 other kinds of non-specific metal ions; the fluorescence recovery efficiency was up to 65% in the re-determination of Hg(2+) after addition of Na(2)S(2)O(3). The MSO/GO-based nanobiosensor is convenient to operate, highly sensitive, highly specific, highly accurate, and reusable. It can be applied to determine trace amount of Hg(2+) in aqueous solutions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Chinese Journal of Industrial Hygiene and Occupational Diseases
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.