Study on Morphology of Electrospun SiOC Fibers

Abstract

Polycarbosilane (PCS) solution was used to form PCS fibers by electrospinning and curing them by thermal process. The cured PCS fibers were then pyrolized under inert atmosphere to obtain silicon oxycarbide (SiOC) fibers. The PCS solution contained 1.2 g/mL PCS with 30% N, N-dimethylformamide (DMF)/70% toluene. The needle inner diameters used for spinning were 0.5 and 0.3 mm and variation for the applied voltage were 10, 12 and 14 kV. The electrospun PCS fibers were cured at 200°C in oxygen atmosphere for 1 hour and then pyrolyzed at 1000°C in inert atmosphere for 1 hour. Nonwoven SiOC fibers diameter ranging between 3 to 8 µm were analyzed by SEM and EDS. The oxygen embodied on the surface of cured PCS fibers arising during the curing process resulted in the SiOC fibers with larger diameters. Rapid solvent evaporation during the pyrolysis caused the SiOC fibers to have ribbon-shapes.