Abstract

Microstructure and corrosion behaviors of cast Mg-2Y-1Zn-0.4Zr-xSr alloys were investigated by using OM, SEM, immersion and electrochemical tests. The results show that the addition of Sr refines the grain, the grain size of Mg-2Y-1Zn-0.4Zr-0.3Sr alloy is the thinnest. the addition of Sr also changes the morphology and distribution of the second phase. The precipitation of W-phase at grain boundary decreases, while the precipitation of punctate W-phase and Mg0.97Zn0.03 phase in the grain increased. In addition, both immersion and electrochemical tests illustrates Mg-2Y-1Zn-0.4Zr-0.3Sr alloy has the best corrosion performance among the four investigated alloys, and shows a relatively uniform corrosion morphology on the surface. Moreover, as the Sr content increases, the corrosion mode of the alloy changes from intergranular corrosion to intragranular corrosion.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call