Study on mechanical properties and damage mechanism of alkali-activated slag concrete

Abstract

The cement industry has become one of the important sources of greenhouse gas emissions, and the alkali-activated slag (AAS) has the same mechanical properties and lower carbon emissions as cement in the production process. Therefore, it can be used as an alternative binder for low-carbon buildings. The effect of alkali concentration (mass ratio of Na2O to binder) on the macro-mechanical properties and meso-damage mechanism of alkali-activated slag concrete (AASC) under uniaxial compression was investigated in this work. Six kinds of concrete with alkali concentration of 2 %, 4 %, 6 %, 8 %, 10 % and 12 % were prepared. The microscopic characteristics of AASC were characterized by nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), x-ray diffraction (XRD) and x-ray energy dispersive spectroscopy (EDS); the meso-damage evolution mechanism of AASC was discussed by statistical damage theory. The results showed that the peak stress and elastic modulus of AASC specimens increased, and the microstructure became denser with the increase of alkali concentration. However, the mechanical properties of the specimen deteriorated to some extent when the alkali concentration exceeded 6 %; for example, the peak stress decreased by 24.00 MPa when the alkali concentration was increased from 6 % to 12 % at the age of 28d. Based on the statistical damage theory, the effective stress concept was introduced to quantitatively analyze the mesoscopic damage evolution of AASC. Both fracture and yielding damage modes were considered. By exploring the regular changes of the mesoscopic parameters, the connection between the macroscopic mechanical properties and the mesoscopic damage mechanism was established. Based on the above mechanical properties and mesoscopic damage results, the alkali concentration of 6 % can be used as the best mixture proportions of AASC.