Abstract
The present work is focused on analysis and influence of nanoclay on the mechanical behavior of polymers viz., epoxy and polyester. Different types of nanocomposites are prepared using 5 wt% and 10 wt% nanoclay with 95 wt% and 90 wt% epoxy and polyester respectively. Nanoclay is mixed with the resin using a mechanical stirrer for 2 hours to ensure the proper distribution of the reinforcement. Casting technique is used to prepare the specimens according to ASTM standard. The specimens are tested for tensile strength and hardness. 5 wt% of nanoclay increased the tensile strength of resins, but 10 wt% decreased the tensile strength. Hardness value of epoxy resin increased by increasing the wt% of nanoclay, whereas there is no much change in the hardness value of the polyester resin.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.