Abstract
Previous studies have confirmed that for cemented tailings backfill, mechanical properties are improved through the addition of fiber. However, for fiber-reinforced cemented sulfur tailings backfill (FRCSTB), physical and flow properties are still unknown. In this paper, the changes in fluidity, splitting tensile strength (STS) and uniaxial compressive strength (UCS) of cemented sulfur tailings backfill (CSTB) are analyzed in detail. Secondly, regarding the addition of glass fiber and polypropylene fiber, the changes in the fluidity, STS and UCS of the CSTB, resulting from the fiber length, fiber content and method of fiber addition used, were analyzed. Moreover, the relationship between the UCS and fiber content is established. Finally, the mechanism behind the influence of fiber and sulfur content on the mechanical properties of CSTB is revealed. The results indicate that with the increase in sulfur content, the fluidity of the tailings slurry exhibits exponential growth. During the process of increasing sulfur content, the UCS and STS of CSTB initially increase and then decrease, reaching maximum values at 12% sulfur content. Similarly, at a fiber content of 0.6%, the UCS and 28d STS of CSTB reach their maximum values. In terms of enhancing the mechanical properties of CSTB, the effectiveness of glass fibers surpasses that of polypropylene fibers. In addition, regarding the improvement of the UCS of CSTB, the mixed addition of fibers is obviously worse than that of fiber alone. However, in terms of enhancing the STS of CSTB, the mixed addition of fibers outperforms the single addition of polypropylene fiber. From a microscopic perspective, polypropylene and glass fiber are able to form strong cohesion with the cement–tailings matrix and effectively prevent the formation and expansion of pores and cracks.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
