Study on laser processing of medical polyether ether ketone surface texture and its improvement on service performance

Abstract

Polyether ether ketone (PEEK) has excellent chemical stability, x-ray transmittance, and elastic modulus close to human cortical bone, which can effectively reduce the stress shielding effect. Therefore, PEEK can be used as a commonly used medical bone implant material to repair damaged bones. However, due to its low surface free energy, PEEK has a certain degree of biological inertness. Surface modification methods are urgently needed to improve this problem. Laser surface texturing is expected to improve the biological inertia of PEEK materials. In this study, an ultraviolet laser with a wavelength of 355 nm was used to construct textures on the surface of PEEK materials. By biomimetic design on the surface of PEEK materials, textures similar in depth and width to the surface topography of natural bones were processed. We explore the specific improvement of corrugated texture, single line texture, and orthogonal texture on PEEK material performance, aiming at improving the service performance of PEEK material and creating conditions for better service of PEEK material in vivo. Through the evaluation of PEEK surface contact angle, friction and wear properties, and biocompatibility, the research results show that laser surface texture treatment can improve many service properties of PEEK materials.