Study on influencing factors and regularity analysis of eddy current method applied to detection of reinforcement corrosion

Abstract

Abstract Rebar corrosion is one of the main reasons for the deterioration of concrete structures. In order to ensure the safe operation of reinforced concrete structures, it is necessary to detect the corrosion rate of rebars in time. This article adopts the eddy current method based on electromagnetic induction to detect steel corrosion, studies the mechanism of alternating current (AC) impedance change induced by steel corrosion in coils, and establishes a mathematical model between steel corrosion and coil AC impedance. Meanwhile, the quantitative relationship between excitation signal frequency, concrete thickness, coil parameters, and coil impedance is studied. Through experiments, it was found that in the early stages of steel corrosion, there is a linear relationship between the scanning peak value of the coil impedance and the mass loss rate of the steel bars, and the slope of the fitting curve decays exponentially with the increase of the concrete thickness. The method used in this paper has an absolute error of less than 0.01 and a relative error of less than 8 % in detecting the mass loss rate of rebars at the initial stage of steel corrosion. When the concrete thickness is less than 20 mm, the relative error is lower than 4 %.