Abstract
The hot deformation behavior of Cu-0.35Cr-0.15Zr (wt.%) alloy was investigated by hot compression tests using a Gleeble-1500D thermal simulator system. The tests were performed under the conditions of 700°С- 820°С temperature and 0.01-10s-1strain rate. The results show that the flow behavior of the studied alloy could be described by the hyperbolic sine constitutive equation, and an active energy of 597.53 kJ/mol was calculated. The processing maps were obtained and analyzed according to the dynamic materials model. The optimum processing parameters of hot deformation of this alloy in the range of this experiment can be attained by the maps. The hot deformation temperature was 800-820°C and the strain rate was 0.01-0.1s-1.The instability zones of flow behavior can also be recognized by the maps.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
