Abstract
The water wall of a 350 MW supercritical unit was severely corroded at high temperature in a short period. An analysis was made on the mechanism of high temperature corrosion of the water wall by chemical analysis, metallographic examinations, mechanical property test, and SEM observation. The results show that high temperature corrosion has no obvious effect on the material properties, and the main failure form is the reduction of tube wall by corrosion. Through the structure and composition analysis of corrosion products, it is found that there are three corrosion product layers on the outer wall of the water wall. Lots of holes existed between the corrosion product layer and the matrix, which made the corrosion product is easy to be spalled. The sulfur content in the corrosion product increases gradually from inside to outside, which proves that sulfur is the main factor affecting the high temperature corrosion of the water wall.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
