Study on high rate MRPC for high luminosity experiments

Abstract

Multi-gap Resistive Plate Chambers (MRPC) has been used to construct time-of-flight system in the field of nuclear and particle physics, due to their high-precision timing properties, high efficiency, reliability and coverage of large area. With the increase of accelerator luminosity, MRPCs have to withstand particle fluxes up to several tens of kHz/cm2 in view of the next generation physics experiments, such as the SIS-100/300 at FAIR-CBM, SoLID at JLab and NICA at JINR. But the MRPC assembled with float glass has very low rate capability not exceeding some hundreds of Hz/cm2. Two possible solutions for increasing rate capability, one is to reduce the bulk resistivity of glass and the other is to reduce the electrode thickness. Tsinghua University has done R&D on high rate MRPC for many years. A special low resistive glass with bulk resistivity around 1010Ω.cm was developed. We also studied the rate capability changes with glass thickness. In this paper we describe the performance of low resistive glass and two kinds of high rate MRPC (Pad readout and Strip readout) tested by deuterium beams. The results show that the tolerable particle flux can reach 70 kHz/cm2. In the mean time, MRPCs assembled with three thickness (0.7 mm, 0.5 mm and 0.35 mm) of float glass were also tested with deuteron beams, the results show that the three detectors can afford particle rate up to 500 Hz/cm2, 0.75 kHz/cm2 and 3 kHz/cm2, respectively.