Abstract
Currently, numerous studies have focused on the differences in the properties of self-compacting concrete with recycled aggregate (RASCC) and normal concrete (NC), while less attention has been paid to the application of RASCC in reinforced concrete structures. In this paper, four-point bending loading tests were performed on seven RASCC beams and four NC beams, considering the parameter of reinforcement ratio, and the flexural properties were analyzed and compared. The results showed that the failure form, moment–deflection curves, and flexural capacity of the RASCC beams were similar to those of the NC beams. However, the cracking moment and the crack width of the RASCC beams were significantly smaller than that of the NC beams. With an increase in the longitudinal reinforcement ratio, the cracking resistance and flexural capacity of the RASCC beams increased significantly. The cracking moment and flexural capacity could be calculated using the method of the Chinese code GB50010-2010. However, compared with the test values, the predicted deflection was slightly less safe, while the maximum crack width calculation was slightly more conservative. Therefore, the current code formula was revised according to the test results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.