Study on Effects of Carrier Gas Flow Rate on Properties of Low Dielectric Constant Film Deposited by Plasma Enhanced Chemical Vapor Deposition Using the Octamethylcyclotetrasiloxane Precursor.

Abstract

In semiconductor industry, low-dielectric-constant SiCOH films are widely used as inter-metal dielectric (IMD) material to reduce a resistance-capacitance delay, which could degrade performances of semiconductor chips. Plasma enhanced chemical vapor deposition (PECVD) system has been employed to fabricate the low-dielectric-constant SiCOH films. In this work, among various parameters (plasma power, deposition pressure, substrate temperature, precursor injection flow rate, etc.), helium carrier gas flow rate was used to modulate the properties of the low-dielectric-constant SiCOH films. Octamethylcyclotetrasiloxane (OMCTS) precursor and helium were injected into the process chamber of PECVD. And then SiCOH films were deposited varying helium carrier gas flow rate. As helium carrier gas flow rate increased from 1500 to 5000 sccm, refractive indices were increased from 1.389 to 1.428 with enhancement of mechanical strength, i.e., increased hardness and elastic modulus from 1.7 and 9.1 GPa to 3.3 and 19.8 GPa, respectively. However, the relative dielectric constant (k) value was slightly increased from 2.72 to 2.97. Through analysis of Fourier transform infrared (FTIR) spectroscopy, the effects of the helium carrier gas flow rate on chemical structure, were investigated. It was thought that the increase in helium carrier gas flow rate could affect the density with changes of chemical structure and composition. In conclusion, regulation of helium carrier gas flow rate can effectively modulate k values and mechanical strength, which is needed for IMD material in semiconductor fabrication possess.