Abstract
In this work, a kind of superhydrophobic aluminum surface (treated-Al-SA) is fabricated by chemical etching using hydrochloric acid and hydrogen peroxide, and then treated by stearic acid. The surface of treated-Al-SA has typical hierarchical structure, which hold its durable superhydrophobicity under water droplet impact test, bending test, temperature test, humidity test and corrosive liquids test. Moreover, treated-Al-SA show excellent self-cleaning property at the different tilt angle under room temperature. Results on the dynamic behavior of water droplet is indicated the good anti-adhesion and superhydrophobicity of the treated-Al-SA. The whole freezing process of the water droplets on the surface of untreated-Al and treated-Al-SA is observed. The freezing time of treated-Al-SA is 59 s, which is longer than that of untreated-Al. It is estimated that the different anti-freezing behavior is caused by the thermal conductivity between the water droplet and plate, which is provided an insight into freezing characteristics of water droplet. This study is offered the novel opinion of the superhydrophobic aluminum surface produced by chemical etching, which may help the application of structured aluminum surface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
