Abstract
The unsteadiness in flow over a linear aerospike nozzle is analyzed by a two-dimensional numerical simulation. Variations in the separation locations on two sides of the full-length plug nozzle, with the increase in nozzle pressure ratios (NPRs), are compared to study the asymmetry. For the linear aerospike nozzle considered, the flow becomes unsteady after . The amplitude of the pressure fluctuation over time is compared at different locations on the surface of the nozzle, starting from the separation point to a few locations downstream. The amplitude of the pressure fluctuation increases from the separation location, reaches a peak value, and then starts decreasing. Interaction between the trapped recirculation bubble and the overexpansion shock causes the asymmetry. An optimum truncation at is able to arrest the separation shock foot at the tip of the truncated base, thereby eliminating the pressure fluctuation over the plug surface. Interaction of the recirculation zones behind the truncated base causes a minor fluctuation from until . Nevertheless, the fluctuations are negligible when compared to the fluctuation over the full-length plug surface. The fluctuations die out at when the truncated plug is nearing closed-wake operation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.