Abstract
The study of non-axisymmetric fuel dispersal and detonation can provide reference for the prevention of industrial cloud explosion accidents and the design of fuel air explosive (FAE). The concentration and detonation fields of 85 kg cylindrical and fan-shaped fuel are investigated by experiments and numerical simulations. A dynamic model of the whole process for fuel dispersal and detonation is built. The concentration distribution of fuel is used as the initial condition to calculate the detonation stage, thus solving the initial value problem of detonation field. The phase and component changes of fuel cloud at different locations are compared. The fuel cloud is divided into directions of 0°, 90°, 135° and 180°. The results show that the maximum cloud radius is 20.94 m in 135° and the minimum is 12.04 m in 0°. The diameter of the detonation fireball is 53.6 m, and the peak temperature is 3455 K. The highest peak overpressure is 3.44 MPa in 0° and the lowest is 2.97 MPa in 135°. The proportion of liquid phase in 0° is 22.90%, and the fuel loss is 11.8% and 9% higher than that in 135° and cylindrical charge, respectively. The stable propagation distance of blast wave in 135° is 42.50% longer than 0° and 28.37% longer than cylindrical charge.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.