Abstract
A kind of compound catalyst containing the main activate component CuO, the second activate component ZrO2 and electronic promoter La2O3 was prepared. It was applicable to treat with high-concentration dimethyl acetylsuccinate (DMAS) production wastewater with catalytic wet air oxidation technology which was used in continuous bubble columns reactor. In this article the influences of concentration of soaked liquid of every component and the second activate component were studied, and the best preparation condition has been determined. The experimental results indicated that the catalyst of CuO-ZrO2-La2O3/ZSM-5 had a higher activity when handling high-concentration DMAS production wastewater. With this catalyst the CODcr removal rate could get 98.7% while non-catalyst only 35.8％ at the reaction conditions as follows: reaction temperature 240°C, reaction pressure 3.5MPa, liquor space velocity＝2.0 h-1, V (oxygen): V（wastewater）＝250:1 and influent wastewater pH=7.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
