Abstract
Carbide-free and carbide-bearing bainitic steels have been obtained. The relationship between the bainitic microstructure and wear resistance has been studied. Results show that carbide-free upper and lower bainitic microstructures obtained in the steel with Si + Al mainly consist of bainitic ferrite and retained austenite. Carbide-bearing upper and lower bainitic microstructures obtained in the steel without Si + Al consist of bainitic ferrite, carbide and trace amounts of retained austenite. The carbide-free bainite exhibits higher strength and toughness than carbide-bearing bainite, especially the toughness. Under lower wear loading, carbide-bearing lower bainite (LB) exhibits higher wear resistance. Under higher wear loading, carbide-free LB exhibits higher wear resistance, which results from the improved surface hardness due to strain-induced martensitic transformation from the retained austenite.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
