Abstract

In view of the common device for heat insulated and cooling of car, an improved new scheme which drove by solar energy is put forward. In this study, the transmission device are arranged inside the automobile, the thin-film solar is composited into the heat insulated and cooling material. Thus, the whole device can be driven by the energy from the photovoltaic conversion, which is clear and zero-pollution. The theoretical energy consumptions and preventable gas emissions are calculated to verify the environmental savings of the device. The results show that it has promising application prospect since it is not only environmentally friendly but also save and convenient as compared to the conventional device.

Highlights

  • In the case of serious shortage of parking spaces in China, the average annual growth rate of motor vehicles is still more than 15% [1,2].So that most of the private cars can often only be parked in the light of the sun

  • According to statistics, when the car is idling, the fuel consumption with the air conditioning opening is 15% higher than the normal

  • With the incomplete combustion of gasoline, the release of the CO, NO and other harmful gases reaches to 5 times as the normal state [3,4]. a waste of non-renewable energy, and pollution of the atmospheric environment

Read more

Summary

Introduction

In the case of serious shortage of parking spaces in China, the average annual growth rate of motor vehicles is still more than 15% [1,2].So that most of the private cars can often only be parked in the light of the sun. With the increase of vehicle temperature and the time that the owner open the air conditioning to cooling before driving, the fuel consumption, carbon dioxide, PM2.5 and other harmful exhaust emissions has been increased. Insulation cooling device is in line with people's expectations and Chinese energy sustainable development goals. The solar film and thermal insulation material are composited, to drive the entire device by the energy comes from photoelectric conversion. It can avoid the manual arrangement / removal of the sun shading device, which is convenient, and could achieve the energy saving and environmental protection

Design
Device selection
Test program and effect
Automobile fuel consumption calculation
Calculation of Carbon Emissions
Findings
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call