Abstract
The aluminized layer and the La-aluminized layer on 20 carbons steel were prepared by hot dip aluminizing method, and the microstructure and composition of the layer were investigated through scanning electronic microscopy (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD) and energy dispersive spectroscopy (EDS). The results showed that the amorphous phase was found in the surface layer of the hot dip aluminized steel. In order to study the phenomenon, the Al-Fe alloy liquids used in hot dip aluminizing were quickly solidified and slowly solidified respectively. The results showed that the amorphous phase was found in all Al-Fe alloy samples under the condition of the quick solidification. While the amorphous phase was only found in Al-Fe alloy sample with La under the condition of the slow solidification. Moreover, the pure amorphous alloy exists in the parts region of the sample, and the weight percentages of Al and Fe in pure amorphous alloy was 23: 2, and the amorphous alloy composition also contains a small quantity La. The formation mechanisms of the amorphous phase and behavior of La in the hot dip aluminized layer were also discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
