Study on a newly developed diagonal connection for hybrid timber trusses made of spruce glulam and beech laminated veneer lumber

Abstract

ABSTRACT The paper presents a truss concept characterised by structural simplicity and economic efficiency. The intended materials are spruce glulam for chords as well as posts and beech LVL (laminated veneer lumber) for diagonals, which are stressed in tension. Connections between the truss members are preferably be realised using self-tapping screws. The main focus of the paper is on a newly developed diagonal connection where the diagonals are screwed on to both outsides of the chords with countersunk screws and special washers. For this diagonal connection, a calculation model of the load-bearing capacity and the connection stiffness is presented. Tests were performed which encompass local and global stiffness examinations between screwed-on beech LVL diagonals and chords even for technically different screw connections. The corresponding test results agree with analytical values according to the proposed calculation model. A corresponding small-scale truss prototype was designed and tested. Computer-aided analyses of the truss deformations give first evidence for the actual feasibility of the truss concept employing the newly developed connection.