Abstract
As the largest unit capacity of nuclear power plant at present, the flow conduit of circulating water pump in EPR1750 nuclear power plant is a volute conduit, which is a cast-in-situ conceret structure with complexly gradual change cavity. Therefore, the hydraulic efficiency of circulating water pump is not only related with the design of pump leaves, but also closely related to the design of volute and the complicated spatial type of intake and outtake conduits. With the pump leaves and the intake and outtake conduits of conceret volute as the research model, based on computational fluid dynamics (CFD)and the three dimensional Reynolds averaged Navier-Stokes equations, an analytic model suitable for computation is established to simulate the three-dimensional steady flow in the whole pumping system under different operating modes. By use of the commercial fluid-computation softer ANSYS, the distribution of basic physic quantities in the fluid field inside the pump and the conduits is obtained. The analysis and prediction of the performance of pump system are made, and the spatial type design of intake and outtake conduits is evaluated. The calculation results can be referenced to improve the design of pump systems in the similar projects.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.