Study of water sorption on modified Agave fibres

Abstract

Polymer composite materials are usually reinforced by synthetic matter such as carbon or glass fibres. However, owing to their good mechanical properties and low density, natural fibres are now increasingly being considered as reinforcement. With the aim of a new natural fibre based composite, various chemical treatments have been performed on Agave ( Americana L.) fibres in order to improve their compatibility with the polymer matrix and to reduce their affinity for water. The effect of these treatments on the fibre water sorption power has been investigated by means of a micro-balance. Equilibrium water sorption isotherms have been deduced from weight variations of the fibres under water vapor pressure increments. Several specific physico-chemical models have been tested to describe the water sorption isotherms. The Park’s model was found to describe the experimental results accurately and over a wide activity range. The sorption kinetics was also exploited in order to evaluate the diffusivity of water in the fibres. The variation of the water diffusion coefficient with water concentration is in agreement with the triple sorption mode described by the Park’s model. These results show a global increase of moisture resistance of the fibres after chemical treatment. This effect is interpreted in terms of chemical and structural modifications of the cell-wall structure.