Abstract
In this paper, we describe the use of a new nonlinear partially-averaged Navier–Stokes (PANS) model with near-wall correction for simulating the cavitating flow around a Clark-Y hydrofoil. For comparison, the standard [Formula: see text]–[Formula: see text] PANS model is also used. The results demonstrate that compared to [Formula: see text]–[Formula: see text] PANS and experiment, the new PANS model shows better performance for cavitation flow, including time-averaged velocity, root mean square (rms) velocity and cavity shedding processing. Through the calculation of the lift and drag coefficient at [Formula: see text] and [Formula: see text], it can be concluded that the cavitation will decrease the lift and increase the drag of the hydrofoil, resulting in a decrease of the lift-to-drag ratio. From the analysis of different terms in both the turbulent kinetic energy (TKE) and dissipation rate transport equations of the cloud cavitation, it is found that the production term and the dissipation term are dominant in the turbulent transport, and they are mainly distributed in the vapor–liquid interface and the trailing edge of the hydrofoil.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.