Abstract

Moxa floss is a type of biomass used as the main combustion material in moxibustion, a therapy that applies heat from moxa floss combustion to points or body areas for treatment. Safety concerns regarding moxa smoke have been raised in recent years. Since moxa floss is the source material in moxibustion, its thermal behavior and pyrolysis products would be related to the products formed in moxa smoke. This work aims to understand the thermal behavior of moxa floss and investigate the pyrolysis products generated from moxa floss combustion. Six commercial moxa floss samples of 3 storage years and 10 storage years, and of low, medium, and high ratios, were selected. The kinetic data from moxa floss combustion was carried out by a thermogravimetric analyzer. Pyrolysis-gas chromatography and mass spectroscopy using a gas chromatograph and mass spectrometer equipped with a pyroprobe were used to examine the pyrolysis products. Thermogravimetric profiles for all the samples were overall similar and showed a monotonic weight decrease. The range of intensive reaction temperature occurred between 150°C and 450°C, which was characterized by a major weight loss and accompanied by an exothermal degradation of the main components. The average ignition temperature for the samples of 3 and 10 storage years was 218.3°C and 222.6°C, respectively, which was lower than most herbaceous plants. The identified pyrolysis products include monocyclic aromatic hydrocarbons, polycyclic aromatic hydrocarbons, ketones, acids, and alkanes. All were of relatively low intensities of below 5% in relative abundance. No volatiles were detected in the samples of 10 storage years. The relatively low values of ignition temperature suggested that moxa floss is more combustible and can be ignited more easily than other herbaceous plants. This may explain why moxa floss has remained as the preferred material used for moxibustion over the years.

Highlights

  • Moxibustion is a traditional Chinese medicine therapy that burns moxa floss and uses the heat generated to apply to certain points or body areas for disease treatment

  • The safety of moxibustion has come under increased scrutiny, especially with reports related to adverse reactions associated with moxibustion [3], as well as reports of chemical components and pollutants in moxa smoke that are detrimental to human health, including inhalable particulate matter, formaldehyde, naphthalene, benzene, and methylbenzene [4, 5]

  • Moxa floss is a type of plant material produced after several rounds of pulverization and sifting from dried mugwort leaves of the species Artemisia argyi Levl. et Vant., Artemisia princeps Willd., and Artemisia vulgaris L [6, 7]

Read more

Summary

Introduction

Moxibustion is a traditional Chinese medicine therapy that burns moxa floss and uses the heat generated to apply to certain points or body areas for disease treatment. It is important to understand the thermal behavior and pyrolysis of products that are generated during the combustion process. Not much research has been done to understand the thermal behavior of moxa floss during combustion. Given that moxa floss is the source material used in moxibustion, its thermal behavior and pyrolysis products would invariably be related to the products formed in moxa smoke and have a direct bearing on the safety of this therapy. The thermal behavior and pyrolysis products of commercially available moxa floss were investigated. Is work aims to understand the thermal behavior of moxa floss and to investigate the pyrolysis products generated from moxa floss combustion The thermal behavior and pyrolysis products of commercially available moxa floss were investigated. is work aims to understand the thermal behavior of moxa floss and to investigate the pyrolysis products generated from moxa floss combustion

Materials and Methods
Results and Discussion
Disclosure
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call