Abstract
The mechanical behaviour of laminated glass elements is governed by material properties of the interlayer, the Polyvinyl Butiral (PVB) being the most used interlayer material in these elements. PVB is a viscoelastic material whose mechanical properties (Young’s modulus, shear modulus, etc.) depend mainly on the load application time and the temperature. Thus an adequate mechanical characterization of the PVB must be performed in order to predict the response of laminated glass elements with a good accuracyIn this work, PVB specimens were subjected to static relaxation tests and to dynamic experimental tests (frequency domain) at different temperatures from −15oC to 50oC using a DMTA equipment. Then the curves at different temperatures were related using the William-Landel-Ferry (WLF) Time-Temperature Superposition (TTS) model to obtain the mastercurve of both the time and frequency domain Young’s moduli of the PVB. Finally, a viscoelastic Prony based model was fitted to the experimental data and used, afterwards, to simulate numerically the static and dynamic behaviour of different laminated glass elements at different temperatures. The numerical simulations were compared with the static and dynamic experimental results achieving a good accuracy in both the static deflections and the natural frequencies. With respect to the damping, the discrepancies are less than 22%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
